All Blog Posts (303)

Dear Friends,

I'm happy to share wit you last updates about our cubesat project. The great news is that we adopted ChibiOS operating system and start to develop a flight attitude estimation and control for Cubesat based on ardupilot projects. The other challenge are about the telemetry control system and…

After a few months without important hardware news on our glorious VR Brain 5 Autopilot, here we finally arrived at the moment of truth after almost 10 years since the first VR 8-bit Brain, the Multipilot was the name of our first autopilot , today…

Great to join http://www.virtualrobotix.com

Interesting OpenSource project that use only a simple RaspberryPI 0 as DVB-S transmitter + RTL-SDR dongle  as receiver. 

This is less expensive DVB-S trasmitter ever developed. 

All the project is by Evariste he is a great developer and member of HAM Radio community ... now we are working togheter to a…

A good news for company that would use Ardupilot Flight Control for professional application . Laser Navigation my company  produce VR Brain Flight Control boards this year at 6th board revision for different kind of application succesfully end the Stage 2 of Aerospace Space quality certification AS9100 . The quality certification is for develop drone ,…

The future is here after over two years of work can be said to have developed in the laboratories of Laser Navigation and thanks to the support of the network of laboratories Virtualrobotix drone technology of tomorrow.

A short video of a recent test test of our system of autonomous flight, mapping and advanced management of the payload.

In the video you can…

These are the first two ready to flight prototype picture of VR Brain Core .…

This is the first preview of Next Gen STm32F7 flight control by Virtualrobotix.  New core , much power and a reliable solution based on industrial micro controller. 

A new oem and hobbyst platform with full support for…

Per ottenere questo risultato , nel team di virtualrobotix nell'ultimo anno abbiamo lavorato

moltissimo , tanti piccoli ingredienti che hanno contribuito a raggiungere l'obbiettivo.

La miniaturizzazione .

La Micro Brain : Un concentrato di tecnologia .

La nuova telemetria :…

Buongiorno a tutti, 

sono felice di presentarvi il primo drone elicottero completamente made in italy :)

• Frame dell'elicottero Protos 500
• Flight Control : VR uBrain 5 
• GPS: VR GPS 8
• System integration by Ferruccio Vicari :) 

nell'ultimo mese di lavoro ho avuto l'onore e il piacere di…

Goodmorning everyone,

I am happy to present the first Drone helicopter completely Made in Italy :)

• Frame Protos 500 Helicopter
• Flight Control: VR uBrain 5
• GPS: GPS VR 8
• System integration by Ferruccio Vicari :)

last month of work I had the honor and pleasure to personally meet one of the developers of…

This is the first Flight of VR Brain 5 LX

These are the picture of first drone controlled by VR Brain 5 LX …

Mechanical Enclosure.

New Thermal Inspector PCB REV 1 RC2…

Model No.: LPD22000/25-6S

Typical capacity : 22000mAh

Typical Voltage: 22.2V

Dimensions: 66×91×198mm

Approx Weight: 2544.0g

Plug: Banana Plug and T-Plug

Continuous Discharge Current: 25C

Burst Discharge Current: 50C

Charge Rate: 1-3C Recommended, 5C Max

RC Lipo Battery Pack is built with the highest quality single cell that engineered and optimized specifically for RC planes and RC cars.Unmatched energy and power density…

In last months virtualrobotix lab work hard on a "secret alter ego project" our target was add low cost companion computer and add advanced functionality to our Flight Conrol .

During last fair in Milan spoke with Michele…

VR Spark 350 born after a year full of experiments, where we worked on improving electronic technologies, mechanical design, usability for end user and the possibility to be used for commercial purposes respecting regulation rules that govern the use of drones in the civil aviation world.

We implemented control systems and flight…

Dear Friend,

I'm happy to present the  prototype of Virtualrobotix thermal camera. 

In last months we work a lot on this new project , it's based on new Flir Lepton sensor and VR uBrain 5.1.

We implement an a specific firmware on uBrain for control the flir sensor , read image , trasmit it in realtime by USB or Bluetooth to PC or Mobile…

Hello,

There is my latest home made craft:

OctoQuad X 750 mm frame, Center plates from 1mm carbon plate, arms are square carbon tube 22 mm ext, motor support are from 2.3 mm G4,

Take Off Weight is 4200 g,

T-Motor 4008-16 with 13" propellers, 6S,

Gimbal is replaced by one 1 kg lead box.

First flight went fine today,

Marc…