Photos

Comments

• 

  Thomas Bredehorn July 6, 2011 at 6:44pm

  Hi Roberto,

  It's OK if you want to setup the bootloader at first,

  but for the start of development I will not need it, because I will work with the olimex jtag to program and debug the code directly.

  Please send an email how much I need to pay for the board.

  regards

  Thomas

   
• 

  Roberto Navoni July 6, 2011 at 11:54am

  Hi Thomas,

  i'm doing first test for put on board a basic firmware using Flash loader by serial port then i prepare a board for you and send it ... so you can help me on this new revision of hw.

  Do you like this approach ? :)

  Best

  Roberto
• 

  Thomas Bredehorn July 5, 2011 at 6:42pm

  Hi Roberto,

  You know I'm interested in this processor too,

  so if I could get a board I will start to port the needed driver functions.

  At first I would only try a simple startup prog, to check sysclocks, IRQ managment and PIO functions.

  Then we should try to get the NG code running with it (with PPM). 

  regards

  Thomas
• 

  Roberto Navoni July 5, 2011 at 9:22am

  Yes is very fast :) I very curious to check this micro .. Do you like to help me to port the driver of ACopter32 to new platform ?

  Best

  Roberto
• 

  Thomas Bredehorn July 4, 2011 at 11:43pm

  It seems that digikey delivers realy fast :)