In this video you can see the first fly review of VRBrain micro 5.0
In this test you can see the great quality of new magnetometer and gps . Emile doing an automatic fly . Set by VR Pad Station 3 waypoint , the last is an RTL . The drone take off from Emile's hand then land exactly in same position :) Emile don't move from his position during all the automatic fly test :)
Dear Friends,
I worked hard in recent weeks to test the new micro VRBrain 5.0
To test the card I used the frame I called our "Personal Robot SDK Fly" The configuration I used for testing and 'the following:
Frame VRX AV250 with Prop Guard
- Micro VRBrain 5
- VR GPS Ublox LEA 6
- 4 10 Amp ESC with Firmware SimonK
- 4 2400 KV Brushless Motors
- 4 Carbon Fiber Propeller dda 5 inches.
- 1 Battery 2200 Mah
- Receiver Futaba SBUS R7008 SB.
- Transmitter T14SG.
During the tests I carried out flight tests and reliability in a stable manner. I flew in different boundary conditions without having any kind of reliability problem. I made flights in both indoor and outdoor.
End the tests with flight manual I started the automated flight test . The GPS took our new GPS VR GPS uBlox LEA6, the main feature of this GPS and 'to have on board the new sensor HMC 5983 with automatic temperature compensation and more accuracy and immunity to electromagnetic interference.
In the tests we performed automated test of loiter mode, hybrid loiter, return to home and waypoint navigation.
Given the excellent results of the tests we have decided to close this firmware revision of the first software will be installed on the cards that will come over the next week.
More info about the components of the test are available here:
http://www.virtualrobotix.it/index.php/en/shop/autopilot/vrbrainmicro51-detail
http://www.virtualrobotix.it/index.php/en/shop/accessories/3dr-gps-ublox-lea-6-30-37-detail
Comments