VR Dragon Hexa Coax Heavy lift , Payload Test



Dear Friends,

in this video you can see my last Payload Test on this Heavy Lift Hexa Coax configuration.

 

The VR Dragon build list :

Multipilot32 : http://www.virtualrobotix.com/page/multipilot32-1

VRIMU FULL : http://www.virtualrobotix.com/pages/vr-imu-10

ESC Motorius 50 Amp : http://www.modellismomaximo.com/product_info.php?cPath=158&products_id=1705

Motors Pulso x6

Propeller x6

Frame Carbon Fiber by Fly Cam Italy.

4 Milk bottle with inside water , 1 bottle 1 kg of water.

 

The firmware is a custom revision of ArdupiratesNG32 , in the next week start to check the ACM 2.0.38 on MP32 all is ready for doing some flying test .

Here you can found the revision of code : http://code.google.com/p/multipilot32/

The next step will be fly with a professional gimbal. With 3 kg of payload whe can put on board a good camera , lens , gimbal ecc ecc.

Do you like my last creation :)

Best

Roberto

 

E-mail me when people leave their comments –

You need to be a member of FOXTEAM UAV CLAN to add comments!

Join FOXTEAM UAV CLAN

Blog Topics by Tags

Monthly Archives