Hi,
I would appreciate very much some help !
I received my Vrbrain today.I have successfully updated the board with 3.1.13 Quad Int_GPS.dfu file.Then when trying to connect to MP I get no connection with time out.
The virtual com port(28) is recognized ,on the board only the yellow led is flashing.
Regards
Jean Louis
Replies
If only the yellow led is flashing it means there could be a hardware problem.
Usually when no GPS is attached Yellow and Green leds should blink toghether.
And when GPS is attached and recognized also red led blinks.
Does the yellow led blink regulary (like 3 or 4 times per second) or does it looks like it blinks randomly and stays on most of the time?
Cheers,
Emile
Hi Emile,
it's blinking regulary let say 3 times/sec.
Hi Jean Louis,disconnect the GPS and use only the board connected to VRBrain ,try to obtain a com < 10 on your pc , we found a bug on Windows OS . If you obtain a com port > 10 you connect the port but have problem to transfer data on serial port on usb driver.
Best
Roberto
Hello Roberto,
The GPS is not connected.I am using windows 7 edition integral.
How can I get a virtual com port <10 usually the computer decides by itself for the com port N°
BR
JL