Hi,
Are you planning to support fixed wing aircraft?
If so, when is this likely to happen?
Which flavour of ardupilot will it be based on?
I am pretty amazed at the progress the team has made on multipilot32. Great to see this success.
Regards
Read more…For last update doc this is the official wiki page :
http://code.google.com/p/multipilot32/wiki/MP32_Loading
I accept suggestion about this discussion.
This is my tutorial about how it is possible to start working with the Multipilot32 board
Read more…Hello
I have a VR Brain 4.5 equiped with external compass on a DJI F550 hexa.
It fly very well with firmware 3.1.14 on these modes: stabilize, loiter, alt hold , circle, auto and RTL.
But I would like to replace loiter in my list of modes by hybrid l
Read more…hi
On mission planner, when i want to connect my VR Brain 4.5, I have an endless series of figure and letter totally incomphréhensible.
I use this firmware: VRBRAIN_3.1.13_HEXA_INTGPS.dfu
My PC is on windows 8.1
I noticed the same thing with my car
Read more…We have just released the latest APM:Copter 3.2 firmware also for VRBRAIN 4 and VRBRAIN 4.5 boards.
You can follow the instructions on this page:
http://vrbrain.wordpress.com/download/version-3-2/
If you own a VRBRAIN 4.5 you can also take advantage
Read more…I have compiled as per http://vrbrain.wordpress.com/development-tools/compiling-vr-brain-code/
FYI the link
Dear friends i Open this task because a lot of people ask me how set pid and how it work .
So now i work on altitude hold setup and Loiter doing some test and Jason release also some demo program for test the setup for standard loiter revision of cod
Read more…Hi,
I would appreciate very much some help !
I received my Vrbrain today.I have successfully updated the board with 3.1.13 Quad Int_GPS.dfu file.Then when trying to connect to MP I get no connection with time out.
The virtual com port(28) is recognize
Read more…I'm owner of a MX16s Remote Control with JETI sender/receiver (main usage: my Hexakopter from mikrokopter)
Now I want to integrate the same nice telemetrie functions for the MP32 Ardupirate software.
My question is: is anyone at work with something l
Read more…Hello Everybody,
I'm just starting to consider porting the Arduplane code in order to run on our MP32F* boards.
Talking with Roberto we assumed the libraries should be the same around 95-98%, so it would not be a big problem.
It should take some week,
Read more…Multipilot 32 Support three kind of bootloader :
Actualy i'm work on it . My starting point was leaflab bootloader code.
This is the thread in his forum.
Read more…Open the Call for Multipilot 32 Developer
We NEED C / C++ DEVELOPERS and Beta Tester.
if you are interested to the project contact me pm and add your comment in this thread.
Multipilot32 will be first processor of series that will Support VROS.
VROS
Read more…Since I have updated my PC on Windows 10, my VRBrain 4.5 is not more recognized (driver don't work).
Remark : my old APM 2.6 work on this Windows 10 PC...
Has it new drivers for Windows 10 ?
Read more…Dear Friends,
I'm happy to inform you that i have upload the VRIDE 0.0.3 Alpha Revision.
Inside this early version of our ide i put some example about the opportunity to use on MP32 a lot of Analog and digital sensor.
In this thread is possible to
Read more…
VS
Dear Friends ,
Today I'm working on IDE for Multipilot 2.0 . I found different kind of approach available For developing application on Arm Cortex A3 microcontroller.
Actually I'm studing this kind of platform :
Xduino , Maple IDE and CooCo
Read more…Hi all,
i'm interested on how the current code (3.1-dev) uses the free output pin in the case we want to use them for controlling standard servo or a shutter.
I fly a quad and i've compiled the 3.1-dev from eclipse. I've tried to set the the PWM fr
Read more…I ordered the Olimex USB-OCD-H and it will arrive tomorrow, so I am preparing myself for some challenges. My goal is to jtag / debug one of the early ChibiOS multipilot examples, something simple.
Does anyone have the OpenOCD-GDB startup/debug/fla
Read more…Dear Friends,
in these day i support my friend Diego about the problem to read analog input with MP32 .
Is very important that you connect AREF to JP18 pin 6 to VCC_3V.
Without this connection you read 4095 for each channel of analog input.
I'm devel
Read more…/**************************** ENGLISH *******************************************/
After struggling with strange wobbling without being able to find correct PIDs, I have finally found the source of the problem.
This problem is affecting all MP32F1 u
Read more…