All Posts (2)

Sort by

The future is here after over two years of work can be said to have developed in the laboratories of Laser Navigation and thanks to the support of the network of laboratories Virtualrobotix drone technology of tomorrow.
A short video of a recent test test of our system of autonomous flight, mapping and advanced management of the payload.
In the video you can see to your left the management of telemetry and live images from the drone, during production of photogrammetry high definition of this shed, on the right instead you can see the anti collision system , mapping and location on board the drone, working in 3D mode, totally alternative to the GPS with an accuracy of 5 cm. Integrated into our flight control.
The system is able through modules VR SLAM and Payload managment to fully manage a mapping mission indoors and inspection giving results very impressive.
The localization module that we have implemented is fully compatible with automated features that normally are handled with GPS. So in fact allows both the flight assisted by Lidar that autonomous navigation with impressive precision than a standard GPS.
This new architecture named VR  Goliath it  is compatible with different types of frames is that copter trad hely, but also boat or plane depending on the component and makes' the supply to professional customers and advanced R & D. Soon we are planning at the Technical University of Padua, a faculty Aerospace Professional Seminar dedicated to students, researchers and High Tech companies  where they will present the results of these research activities and will experience first hand the latest innovations born out by our lab ... . different professional customers have begun to use these technologies and our feedback from the field in real situations have confirmed the quality tested in our laboratories. To access more information on the platform you can contact me at r.navoni@virtualrobotix.com .

Read more…

70933069?profile=RESIZE_1024x1024

70933089?profile=original

These are the first two ready to flight prototype picture of VR Brain Core .

70933254?profile=RESIZE_1024x1024

Are available for OEM and Beta tester different configuration of board with STM32F4 or F7 and with some additional connector like USB / SD Card or without connector that normally are available on custom distribution board.

Actually we are working at the first custrom distribution board for our VR Wasp , the ultra light complete drone compliant to under 300 gr drone for urban enviroment .

70933143?profile=RESIZE_1024x1024

This is a picture with comparison between VR Brain 5 , VR Brain Core 6 and VR uBrain 5 as you can see the design of the core is adapt for fast protyping and for simple integration inside custom design.

70933150?profile=RESIZE_1024x1024

For check the new VR Core 6 on air we decide to use this simple frame in 5 minutes we replace the VR uBrain and test the new board . 

In the video you can see the result of first flight ... It's impressive :) 

All the APM firmwware normally available for VR Brain 5 : Copter, Standard Hely , Plane , Rover , Boat it's available for VR Core. 

Here will be more information about the new OEM board : 

https://vrbrain.wordpress.com/

For VR Core there is a porting of Cleanflight by TommyLeo 

https://vrbrain.wordpress.com/quick-start-guide/speedyflight-2-31-multiwii-32-by-tommyleo/

We are discussing with Alessio Morale one of the founder of Libre Pilot project for support it inside his project.

I hope that you like this new design. It's not a replace of vrbrain and vrubrain but it's for OEM and special custom design where the integration is the must .

The board is only 5 grams 

for more info contact me at : r.navoni@virtualrobotix.com 

Best

Roberto Navoni

Read more…

Blog Topics by Tags

Monthly Archives