i noticed a few problems when flying with the oilpan and an atmel chip. mainly the loss of control authority when flying not so smooth.
would be interesting to know if anyone has soldered the pad as described in the link.
this weekend is s
Read more…Dear Friends,
in these day i'm working on support of i2c ESC like a microkopter or VR i2C ESC.
So I'm doing a lot of test and check different situation on different configuration.
At this point i'm testing in flight my quad with VR I2C ESC .
There're
Read more…
VS
Dear Friends ,
Today I'm working on IDE for Multipilot 2.0 . I found different kind of approach available For developing application on Arm Cortex A3 microcontroller.
Actually I'm studing this kind of platform :
Xduino , Maple IDE and CooCo
Read more…I'm owner of a MX16s Remote Control with JETI sender/receiver (main usage: my Hexakopter from mikrokopter)
Now I want to integrate the same nice telemetrie functions for the MP32 Ardupirate software.
My question is: is anyone at work with something l
Read more…Hi,
I am having some issues with the board that I hope someone may be able to help with.
Firstly I flashed the board a few days ago with the Ardupirates32 code and everything seemed to work ok when I went into the CLI. Then today, I tried to uplo
Read more…Hi all,
I have the Futaba receiver with the SBus port, will the Multipilot32 support the SBus ?
If yes, can the Multipilot32 support more then one receiver and have SBus out put to a powerbox ?
Thank you,
Roman Farber
Read more…
I am at a state where I would like to test my rc inputs (from the ppm encoder), my GPS functionality (data), and seriel ports (I am in the process of soldering and wiring up the QBee-Pros's). The Diydrones PPM Encoder worked out of the box - 1st time
Read more…Ciao Roberto,
ho iniziato a fare qualche test sensori su MP32 con gli examples presenti su VRide 0.0.3.....al momento testati e funzionanti sono magnetometro HMC5843 e GPS...ho qualche dubbio sul barometro BMP085,per le analogiche mi devo procurare
Read more…hi all,
i am making less progress as expected, but i will fly soon 32 bit code :)
since a few days i have a tri-copter frame right next to me.
need to add the yaw servo and ...$
yes you guessed it - the mixer table does not know anything about tri-
Read more…Multipilot 32 Support three kind of bootloader :
Actualy i'm work on it . My starting point was leaflab bootloader code.
This is the thread in his forum.
Read more…Dear Friends,
I'm happy to inform you that i have upload the VRIDE 0.0.3 Alpha Revision.
Inside this early version of our ide i put some example about the opportunity to use on MP32 a lot of Analog and digital sensor.
In this thread is possible to
Read more…Greetings all,
JP19 is for GPS. On the ArduPilot Mega it is for GPS as well, but on the Multipilot 2.0 the straight pin male header are so long as to not allow anything to connect to it if the OilPan is mounted.
This is the link that I have been look
If anyone notices errors, or has suggestions, let me know.
Jim T
Read more…
Dear Friends,
in these day i support my friend Diego about the problem to read analog input with MP32 .
Is very important that you connect AREF to JP18 pin 6 to VCC_3V.
Without this connection you read 4095 for each channel of analog input.
I'm devel
Read more…Does anyone have a proven pin-to-pin connection diagram for the Olimex 20pin to MP32 Arm 10 pin connector. In otherwords, what pins on the Olimex go to what pins on the MP32 Jtag header?
Jimt
Read more…
Hi , I just got the MP32 hardware, very nice design!
Before MP32, I have played for half a year with Arducopter. This is my first time to use the Cortex-M3 processor and I would like to do it in a professional way at the beginning. I have done some r
Read more…I had a 450mA 2s lipo powering the MP32 today while I was scoping, setting up, and testing the ppm encoder and a few various receivers (trying to find one which ones incorporate a failsafe in a way that would properly trip out the ppm encoder). Durin
Read more…What is the easiest way to download the following. I am not familiar with code.google and cod repositories, and I couldn't find a .zip or .rar to download the latest:
http://code.google.com/p/multipilot32/source/browse/#svn%2Fbranches%2FRedfox74
I
Read more…With the Oilpan connected, the MP32 is not going into run mode. Boot_0 (JP11-5) is staying high. Without the Oilpan installed (jumper between JP11-5 and JP11-6) the test program works and I am able to see data on usart.
Have I missed something obvi
Read more…