We have just released the latest APM:Copter 3.2 firmware also for VRBRAIN 4 and VRBRAIN 4.5 boards.
You can follow the instructions on this page:
http://vrbrain.wordpress.com/download/version-3-2/
If you own a VRBRAIN 4.5 you can also take advantage
Read more…Hi,
When using a VRMicroBrain with a APM:Plane, should the buzzer make any noise? I have a buzzer from a PixHawk( like this http://www.digikey.com.au/product-detail/en/CPE-827/102-1620-ND/1738894) .
I attached one wire to the "buzzer" pin and the ot
Read more…To all VRBRAIN users, we have just published version 3.2 of the APM:Copter firmware.
You can install the firmware using Mission Planner "Initial setup-->install firmware and selecting the 3.1.5 version in the main window.
Unitl the official 3.2 rele
Read more…Hi, I need to know which basic settings must be done at first to have a successful first flight.
I did all the calibrations (acc, mag, radio), set the type of vehicle etc. in the initial setup. Than I disabled the preflight check, calibrated the ESCs
Read more…Dear Friends,
In this section of the forum you can tell who you are, what are your hobbies, and your experience in developing firmware, hardware, frame. In the creation of documentation, management of other community, coordination of activities' of t
Hi,
I have a problem with connecting the microbrain to MP using the original microtelemetry module on the microbrain, and this module on PC win8. I go in initial setup > optional hardware > 3DR radio. I select COM7 (silicon labs.....USB to UART....)
Read more…Hi all,
Which is the +5v, gnd, tx and rx pins of the 5 pin connector for GPS and 4 pins connector for the magnetometer on the microbrain?
Read more…Titan Aerospace and Alliance Lp Drones are designing and manufacturing these long endurance solar powered UAVs. Impressive!
First post and a quesion. Sorry :)
I am installing a VR Brain 5.1 to control a large quad. I have the VR Brain and GPS units connected up on the bench and everything seems to be working except the GPS and external compass. I have flashed the board u
Read more…I have compiled as per http://vrbrain.wordpress.com/development-tools/compiling-vr-brain-code/
FYI the link
Here is my second support request:
Since the uBrain came with AC3.2-rc2, I wanted to update with rc7 .
The MP (recent version) shows this :
This is probably no problem, since I downloaded the recent (complete) package from VR and I can upload custom
Ciao a tutti. Sto utilizzando il controller in oggetto, su un gimbal 3 assi autocostruito. L'autocostruzione non è mia, ma sto solo cercando di sistemarla e adattarla al mio carico, ossia una gopro e una termocamera. La stabilizzazione è ok, molto bu
Read more…I would like to know :
1. 5V input : Recommended operation voltage range ? Since I´m coming from APM/PX,which are limited to certain op voltage, and experienced that so called 5V BEC provide voltages between 4.8-6V, I would like to know the recommend
Read more…Hi, im currently designing my own rover and I'm wanting to use VR micro Brain as a alternative to APM 2.5 because it looks amazing and the size of it is perfect for what I need. Basically what I'm building is a two wheeled bot that steers from the r
Read more…Just a small question: After some rotation of my quad the heading in the HUD continues to rotate for a certain time and the direction of North is very artistically moving;-) I'm powering the micro Brain from an ESC with 5V on the recommended port. Th
Read more…Hello,
I have 2 Led and Buzzer.
Led sequence is OK (GPS fix and Motors), but buzzer is always beep-beeping as soon as µBrain is On. When I arm the motors Beep sequence is OK but Beeping is stil there.
Is there a condition trigging Alarm?
Fence is
Read more…Hello,
I have µBrain with latest firmware (3.2 rc4).
Is Spline navigation implemented (in mission planner navigation option we can choose Spline trajectory at waypoints)?
Regards,
Marc
Read more…Probably related to the Failsafe problem, but i have an issue with 2 different copters running micro Vrbrain 5.1 and D4R-II 27ms receivers(3.2 rc2) connected with ppm. Both of them go in failsafe after a while. No Rssi problems on my tarranis. In th
Premetto che sono alla mia prima build di quadricottero e che non ho esperienza con Flight Controller.
Oggi ho tentato di collegare MicroBrain a Mission Planner per cominciare il mio setup, ma ho incontrato delle difficoltá.
Ho scaricato e installato
