I am at a state where I would like to test my rc inputs (from the ppm encoder), my GPS functionality (data), and seriel ports (I am in the process of soldering and wiring up the QBee-Pros's). The Diydrones PPM Encoder worked out of the box - 1st time
Read more…Can I upload a binary which is compiled for the MP32F1 to a MP32F4 and will it work?
I'm asking as I have already bricked too many things in the past ......
Martin
Read more…Hi every body,
yesterday I got my VR Micro Brain 5.1. Yepeee;-)
I want to configure it with the MissionPlanner. The USB connection on the PC need a driver. I tried to download it from: http://www.nonplace.tv/vrbrain/drivers/VRuBrain_drivers_2.0.0.4.e
Read more…What is the easiest way to download the following. I am not familiar with code.google and cod repositories, and I couldn't find a .zip or .rar to download the latest:
http://code.google.com/p/multipilot32/source/browse/#svn%2Fbranches%2FRedfox74
I
Read more…Roberto,
I can’t reply to the ArmCopter Dev Group Discussions, but I wanted to add to the thoughts. I think that your hardware is far more advanced than where ArduPilot is at.
I am a COMPLETE novice, so simple is good. I do want to go far beyond t
Read more…Dear Friends,
when i start the project of vrbain i decide to improve the board and reduce the size so if MP32F4 v3 is good for a standard copter frame . VRBrain is better on small copter but also on gimbal.
Yesterday i start an interesting discussio
Read more…Dear Friends,
today with a use we had some problem on usb dfu driver .
So if you use the windows 32 you can use the driver in directory driver/dfu in vride main directroy. So you can connect the board and use the usb bootloader.
If you use a 64 bit w
Read more…Just to know, I read a lot about your chibios implementation on multipilot32 past year.
How far it goes? Do you any working code?
Read more…Hi, Roberto Navoni,
I have just joined the visualrobotix. I do all the compile according to the developer manual from parrot but it doesn't work. Now I just want to get a correct Linux Example for firmware 1.4.6 and I can learn from. My ability is
This section of the forums you can discuss the progress of work on firmware Arducopter. http://code.google.com/p/arducopter/ e anche la versione che supporta hardware MultiBoard.">
Support
is provided for the standard version of the project that emplo
In this video you can see a short video introduction to Multipilot Board. (Italian Version winth subtitle):
The Hardware part that you need to build your multicopter are :
1 MultipilotBoard.
3 Gyro Sensor.
4 I2C ESC.
1 RC Reciver with Serial P
Read more…Dear Friends,
in these day i'm working on support of i2c ESC like a microkopter or VR i2C ESC.
So I'm doing a lot of test and check different situation on different configuration.
At this point i'm testing in flight my quad with VR I2C ESC .
There're
Read more…In this discussion we support different kind of Arduino based UAV firmware : Aeroquad , Arducopter (The new code), Arduimu , Ardupilot.
In this community some peopple are in DEVTeam of this news project :)
Those're some of directly supported project :
Today I made some tests with my BLMC's. With a 50 Hz PWM Signal they work fine, but connected with the MP32 they don't start, so I had a look with my Osziloscope and found out that my MP32 sends it's PWM with 550 Hz. That's maybe to much for my Turni
Read more…I put the following post on the ChibiOS site, and thought somewhere on VR might be of assistance as well, as it pertains to the MultiPilot32 project. The tutorial I refenced is located here: http://www.chibios.org/dokuwiki/doku.php?id=chibios:article
Read more…